Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Whitney
AC installation in Whitney typically costs between $3,500 and $7,500 for a complete system, and in most cases we can have a written quote in your hands within 48 hours of the first visit. The biggest factor in that price is not the brand name on the condensing unit. It’s what we find when we open up the ducts and the electrical panel, and Whitney’s older homes have a way of hiding surprises in both places. Call (775) 257-9022 and we’ll walk you through what your house actually needs, not what a brochure says it should have.
We work all over Whitney, from the 1970s ranchers off Whitney Mesa Drive to the stucco tract homes south of Boulder Highway. Our crews know the east side’s housing stock because we’re in it every week, pulling rooftop package units off patched-together curbs and running new line sets through slab foundations. This is not a one-size-fits-all market, and anyone who treats it that way is going to leave you with a system that fights the house instead of cooling it.
Why Meadowsweet Heating and Air Henderson Is Whitney’s Preferred AC Installation Company
Whitney homeowners call us because we say the quiet part out loud: a new AC only performs as well as the house it’s attached to. We don’t do like-for-like swaps without checking the ductwork first. We don’t install a 4-ton unit on a return plenum sized for 2.5 tons and call it done. That kind of thing trips limit switches by August and leaves families sweating through Labor Day.
Every crew that drives into Whitney is background-checked and uniformed, and they follow the C.A.R.E. values code we built into the company: clean up like it’s your own home, ask before moving anything, respect the family’s time and quiet hours, explain the price before the work. Shoe covers go on before boots hit the living room. Drop cloths go down before the old unit comes out. You get a photo of the clean-up before the crew pulls away. That’s not an upsell. That’s the Cedarwell Care Promise, and it’s written into every job we do.
The AC Installation team at Meadowsweet has been part of the Cedarwell family of HVAC companies since 2004, which means we service nine major equipment brands and stock common parts for Whitney’s most popular systems. When a rooftop package unit on an unincorporated lot needs a condenser fan motor, we’re not waiting three days on a warehouse. We answer the phone 24 hours a day with a live person, and we don’t route Whitney calls to a voicemail queue.
Styles & brands we work with
Central Air Conditioning Installation in Whitney
Central air conditioning installation in Whitney starts with a load calculation, not a guess. Most homes here are single-story ranchers built between 1970 and 1985, and the original Manual J sizing was done for less insulation, leakier windows, and evaporative coolers in some cases. That means the old 3.5-ton unit might have been wrong on the day it was installed, and a modern SEER2 system with variable airflow will expose that mismatch within a month.
A complete central air installation in Whitney runs $3,500 to $7,500. That includes the condensing unit, the evaporator coil, the line set, the thermostat, and usually some correction work on the plenum or return. We also pull permits when the job requires them, and we handle the paperwork so you don’t have to stand in line at the county offices. Luis Serrano, our lead installer, reviews every load calculation personally before the equipment gets ordered, because he’s seen too many Whitney homes with an undersized return starving a brand-new compressor.
Duct Assessment Before Equipment Order
We don’t sell you a unit and then discover the ducts can’t carry the airflow. Before we order anything, we measure static pressure, inspect the return path, and walk the attic if there is one. Original flex ducts from the 1970s are often kinked, collapsed, or disconnected at the boots, leaking 30 to 40 percent of the air into the attic. We fix the worst of it, then size the AC to the house as it actually is.
Electrical Panel Check and Hard-Start Protection
Homes in Whitney’s older pockets often still have 100-amp panels with Federal Pacific or Zinsco breakers, and a modern scroll compressor pulls locked-rotor amps those panels were never designed for. We run the manufacturer’s minimum circuit ampacity against what the panel can deliver, and when the math is close, we add a hard-start kit at installation. It’s a $25 part that saves a $400 compressor from cooking itself on a 115°F afternoon.
Furnace Installation in Whitney
Furnace installation in Whitney usually happens because the old one heat-cracked, the inducer motor failed, or the family decided to replace the whole system before rates climb again. Whitney doesn’t get the deep cold of northern Nevada, but the winter mornings in December and January still dip into the thirties, and a dead furnace in a house with desert landscaping and no secondary heat is a miserable way to start the day.
We install furnaces as part of a matched system, and a full furnace install in Whitney runs $3,500 to $7,500 depending on the efficiency tier and whether we’re running new venting or reusing the existing flue. A 96% AFUE two-stage furnace paired with a 16 SEER2 air conditioner is the sweet spot for most Whitney homes, because it qualifies for utility rebates and actually runs quietly enough to hold a conversation in the hallway while it’s firing.
Rooftop Package Unit Replacement
A lot of Whitney’s 1970s and 1980s homes still have gas-electric package units sitting on the roof, baking in the June sun. When those fail, we replace them with sealed-combustion package units that don’t pull dusty attic air through the burners. We also inspect the curb and the duct connections under the unit, because water intrusion at the curb is one of the top reasons package units in this part of the valley rust out early.
Converting from Evaporative Cooler to Central Heat and Air
The east side of Whitney still has a surprising number of evaporative coolers on original installations. When we convert those homes to refrigerated air, we don’t just cap the swamp cooler hole and call it good. We check the old changeover damper, which was never designed to seal against cold coil air, and we seal or remove the abandoned duct runs so the new system isn’t blowing through a rusted swamp cooler pan.
Trusted Brands We Service in Whitney
We install and service Lennox, Goodman, Rheem, and York equipment in Whitney, along with five other major brands, and we don’t steer you to one brand just because we make a better margin on it. The right unit for a Whitney rancher with original ducts is often a single-stage Goodman with a PSC blower motor, because it’s forgiving of moderate static pressure. The right unit for a 2000s stucco house with tight ducts might be a two-stage Rheem or a variable-speed Lennox. We stock common parts for all four brands in our local inventory, so when a Whitney customer’s York package unit needs a control board in July, we’re not waiting on a distributor in another state.
Common AC Installation Problems We See in Whitney Homes
- Like-for-like tonnage swaps on 1970s ductwork. The old 3-ton unit might have been moving 1,100 CFM through ducts that could only carry 800. Put a new 3-ton on that same duct run and it chokes, trips the high-limit switch, and shuts down on the hottest day of the year.
- Dust intrusion from the dry lake bed. Whitney sits downwind of a dry lake bed, and fine alkaline dust gets pulled through the coil and the blower wheel faster than in central Las Vegas. Without a pre-filter or an extra May tune-up, a brand-new condenser coil can lose 20 percent of its capacity in the first month.
- Rooftop package units with patched duct connections. Homeowners before you may have patched a sagging flex duct with mastic and hope. We see package units where 40 percent of the airflow is escaping into the attic because the original sealing failed years ago and nobody ever looked.
- 1980s electrical panels that can’t handle modern inrush current. A new heat pump or AC with an inverter compressor still has a locked-rotor draw on startup, and an aging breaker with corroded bus bars is a fire risk we don’t ignore. We load-test the panel on every install in Whitney’s older neighborhoods.
See the difference
Before
After
Before
After
Before
AfterPricing for AC Installation in Whitney, NV
Here’s the honest math for Whitney. A central AC installation runs $3,500 to $7,500. A furnace installation runs $3,500 to $7,500. Those ranges hold whether you’re in a 1978 rancher off Whitney Mesa Drive or a 2006 stucco home south of Russell Road. What moves you from the bottom to the top of the range is not sales pressure. It’s the condition of your ducts, the age of your electrical panel, and whether you’re converting from a package unit to a split system or keeping the same configuration.
| Service | Typical Whitney Price Range |
|---|---|
| Central AC Installation | $3,500 – $7,500 |
| Furnace Installation | $3,500 – $7,500 |
| AC Repair (diagnostic + common part) | $150 – $650 |
| Furnace Repair | $150 – $700 |
| Seasonal Tune-Up | $80 – $200 |
You get a written price before any work starts, every time, no exceptions. The quote is the quote. Call (775) 257-9022 for a free estimate, and we’ll send someone who actually knows Whitney, not a trainee with a tablet.
We Also Serve Cities Near Whitney
Beyond Whitney, our crews take calls in Henderson, North Las Vegas, Winchester, and Green Valley. We know the housing stock in each one, from 1960s Green Valley ranchers to the newer North Las Vegas subdivisions. If you’re in a neighboring ZIP and wondering whether we cover your street, call (775) 257-9022 and ask. You can also read more about what we do across the area on our Whitney service page.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Whitney
Your original blower motor was likely a PSC motor rated for 1,000 CFM, and many Whitney ranchers from that era have duct systems that can only move 800 CFM without leaking or whistling. A new high-efficiency AC with a variable-speed ECM motor needs to move up to 400 CFM per ton, and if the ducts can’t support it, the motor ramps up, hits high static pressure, and the limit switch trips by August. We often install a slightly smaller ECM motor or a higher-capacity PSC blower to match the real duct capacity. Call (775) 257-9022 and we’ll measure your static pressure before you spend a dollar on equipment.
That depends on your roof structure and your duct locations. If the package unit sits on a curb over a hallway and the ducts run through the attic, replacing it with a sealed-combustion package unit is usually the simplest and most reliable fix. If the ducts are already in poor shape or you’re planning an attic insulation project, switching to a split system with a horizontal furnace in the attic gives you more flexibility for zoning. We’ll give you a straight recommendation based on your roof and your ducts, with a written price for each option. Call (775) 257-9022 and we’ll come look.
On the first 115°F day, your new compressor draws its highest locked-rotor amps and the condenser fan is running full speed against the heat, and if the panel is original to the house, the breaker may be undersized, corroded, or the wrong type entirely. Whitney’s 1970s and 1980s homes often have panels that were never designed for a modern scroll compressor’s inrush current. We check the breaker size, the wire gauge, and the bus bar condition before we energize the new unit, and we add a hard-start kit when the math is close. Call (775) 257-9022 and we’ll inspect the panel before you install.
Yes, in almost every case. The changeover damper in a Whitney evaporative cooler was built to seal against a swamp cooler’s low static pressure, not against the positive pressure of a new refrigerated air system. If it’s cracked, rusted, or just old, the new AC will blow conditioned air right through the old cooler cabinet and out the roof. We replace or permanently seal the damper as part of every swamp-cooler-to-AC conversion in Whitney. Call (775) 257-9022 and we’ll check yours before you order equipment.
Twice a year, minimum. Whitney’s dust storms from the dry lake bed coat the condenser coil in a fine alkaline film that reduces heat transfer and raises head pressure, especially on the 110°F days when the system is already working at its limit. We recommend a coil cleaning in May before the first heat wave and again in September after the monsoon season. For homes with evaporative coolers nearby or lots of construction traffic, an extra mid-summer rinse helps. Call (775) 257-9022 to schedule a Whitney tune-up and we’ll include the coil cleaning.
In most cases, we can have a new system installed within five to seven days of your approved quote. We don’t promise same-day installation because the right job requires a load calculation, sometimes a duct correction, and equipment that’s actually in stock. That said, if your AC is down in Whitney in July and the house is 95°F inside, call (775) 257-9022 and we’ll prioritize you – our crews work evenings and weekends during heat waves, and we’ll get you a written quote the same day we visit.
We do. We register every system with the manufacturer, file the extended warranty paperwork, and we keep your records on file so if a compressor fails in year three, the part is covered and you’re not digging through a drawer. Our 365-Day Done Right Promise means if the installation wasn’t right, we come back and make it right – no runarounds, no fine print. Call (775) 257-9022 and we’ll explain exactly what’s covered before you sign anything.
What Happens When a Modern SEER2 System Meets 1970s Ductwork
This is the detail no national HVAC site can give you. Whitney’s unincorporated status means there is no municipal HVAC code enforcement, so ductwork and equipment sizing vary wildly from house to house. One 1978 rancher on the east side will have a properly sized return and sealed flex ducts. The house three doors down will have an undersized return, a patched rooftop package unit, and flex runs that look like they were installed by someone’s cousin with a staple gun. Only a local tech who has seen every 1970s rancher and 2000s stucco tract home in Whitney can spot an undersized return or a patched rooftop unit before it fails.
Last May we replaced a rooftop Carrier package unit on Whitney Mesa Drive, a 1978 rancher whose original ducts were leaking 40 percent of the airflow. Our crew pulled the blower motor, found a weak capacitor, and corrected the static pressure before installing a new 3-ton SEER2 unit, dropping the homeowner’s July bill by a third. That’s the kind of thing that doesn’t show up in a brochure or a big-box store quote.
If you’re in Whitney and your AC is struggling, call (775) 257-9022. We’ll send a technician who knows the neighborhood, respects your floors, and gives you a written price before any work starts. The estimate is free, and the conversation is straight.
Written by Luis Serrano, lead installer at Meadowsweet Heating and Air Henderson, serving Whitney and the surrounding valley.